Trolley Operators:
	MT - Medium Duty Trolley Operator for Standard Lift Sectional Doors Model MT is a Medium-Duty Logic trolley operator for standard lift sectional doors. It features a high-starting torque motor, a compact design, quicket-gliding rail spacers and a quick-mount swivel header bracket.
	T - Industrial-Duty Trolley Operator for Standard Lift Sectional Doors Model T is an industrial-duty trolley operator for standard lift section doors. It features a low profile and industrial ball bearings on the output shaft.
	APT - Low-Profile Apartment House Trolley Operator Model APT is a low-profile apartment house operator that features a resilient-mount motor, low-profile design, industrial ball bearings on the output shaft, and quiet-gliding rail spacers.

Jackshaft Operators:
	3900 - Light-Duty Commercial Jackshaft Operator for Sectional Doors Model 3900 is a light-duty jackshaft operator for light-duty commercial sectional applications only. It features a compact design ideal for limited height, cathedral, or obstructed ceiling installations.
	J - Industrial Duty Jackshaft Operator Model J is an industrial-duty jackshaft operator. It features a removable hinged electrical box cover, a continuous-duty high-starting torque otor, industrial ball bearings on the ouput shaft and a universal mount frame design.
	DJ - Industrial-Duty Jackshaft Operator with Internal Door Lock Sensor Model DJ is an industrial-duty jackshaft operator with an internal door lock sensor. It features a removable hinged electrical box cover, a continuous-duty high-starting torque motor, industrial ball bearings on the output shaft and a universal-mount frame design.

Hoist Operators:
	H - Industrial-Duty Hoist Operator Model H is an industrial-duty hoist operator. It features a continuous-duty high-starting torque motor, a universal-mount frame design, industrial ball bearings on the output shaft and an emergency chain hoist with an electric interlock.
	HJ - Industrial-Duty Hoist/Jackshaft Operator Model HJ is an industrial-duty hoist/jackshaft operator for use on rolling doors, grilles, and industrial sectional doors with high or vertical lift.
	GH - Heavy Industrial-Duty Gear-Reduced Hoist Operator Model GH is a heavy industrial-duty gear-reduced hoist operator. It features a removable hinged electrical box cover and is easily field-converted in seconds for a left or right-handed drive and hoist.

Slide Gate Operators:
	Slide Gate Operators Slide operators are used when there is limited space behind a secured facility, so the gate must run parallel to a fence or wall.

LDT

TC3

MC3

MC3H

MCB

MCBH

		• 1/2, 3/4, 1HP, 115-230-460 or 575V, single or three phase motor, capacitor start, overload and under voltage protection. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • Precision pillow block bearings on output shaft. • Adjustable friction clutch, magnetic solenoid brake. • 4L V-belt primary reduction, spur gears on secondary reduction. • #41 roller chain and sprockets. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release disconnect arm for emergency manual operation. • Heavy duty dual angle track.

MRAT

		• 1/2, 3/4HP, 115-230-460 or 575V, single(instant-reverse) or three phase motor, capacitor start, overload and under voltage protection. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • Timer to close (0-4 min) with red and green traffic lights. • Adjustable mechanical safety reverse.   ¥ 4L V-belt primary reduction, #65 roller chain and sprockets. • Fully driven, adjustable limit switches. • Heavy duty single button wall station. • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release disconnect arm for emergency manual operation. • Heavy duty dual angle track

LDJ

		• 1/2HP, 115V single phase motor, capacitor start, built in overload protection. • Solid state circuit board Lynx-22. Built in 1.5 second delay. • 4L V-belt primary reduction, #65 drive chain and sprockets. • Adjustable friction clutch. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • Adjustable spreader bar assembly included. • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release, wall disconnect device for emergency manual operation.

MCJ

		• 1/2HP,115V single phase motor, capacitor start, built in overload protection. • Solid state circuit board Lynx-22. Built in 1.5 second delay • Adjustable mechanical safety reverse. • 4L V-belt primary reduction. • #65 roller chain and sprockets. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release disconnect arm for emergency manual operation. • Heavy duty dual angle track.

MCJH

		• 1/2, 3/4, 1HP, 115-230-460 or 575V, single or three phase motor, capacitor start, overload and under voltage protection. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • 4L V-belt primary reduction, #41 drive chain and sprockets. • Adjustable friction clutch, magnetic solenoid brake. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • Adjustable spreader bar assembly included. • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release, chain hoist device for emergency manual operation.

HDC

		• 1/2, 3/4, 1HP, 115-230-460 or 575V, single or three phase motor,   capacitor start, overload and under voltage protection. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • 5L V-belt primary reduction, #50 drive chain and sprockets. • Adjustable friction clutch, magnetic solenoid brake. • Precision pillow block bearings on output shaft. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • Adjustable spreader bar assembly included. • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release, chain hoist device for emergency manual operation.

GHO

		• 1/2, 3/4, 1, 1-1/2HP, 115-230-460 or 575V, single or three phase motor, capacitor start, overload and under voltage protection. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • 40:1 ratio, heavy duty gear reducer in oil bath with cast iron housing. • #50 drive chain and sprockets. • Magnetic solenoid brake. • Precision pillow block bearings on output shaft. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • Adjustable spreader bar assembly included. • External 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release, chain hoist device for emergency manual operation.

HGO

		• 1/2, 3/4, 1HP, 115-230-460 or 575V, single or three phase motor, capacitor start, overload and under voltage protection. • Splash proof cover with key lock. • Solid state circuit board Lynx-6000. Built in 1.5 second delay. • 5L V-belt primary reduction, #41 drive chain and sprockets. • Adjustable friction clutch, magnetic solenoid brake. • Fully driven, adjustable limit switches. • Heavy duty 3 button wall station (Open, Close, Stop). • Precision pillow block bearings on output shaft. • Internal 3 pole terminal strip for radio control. • Internal 9 pole terminal strip for all auxiliary devices. • Quick release, disconnect device for emergency manual operation.